Emerson KJ3241X1-BA1 12P2506X032 Serial Interface Card

KJ3241X1-BA1 12P2506X032 combines the KJ3241X1-BA1 Serial Interface Card model with the supplied 12P2506X032 article marking. Its function is serial communication within a compatible Emerson DeltaV M-series installation; the exact label, controller record and terminal block must agree before use.

KJ3241X1-BA1 12P2506X032 must match the installed DeltaV M-series carrier and a keyed terminal block in position D4. Rotary keying is used to prevent an incompatible I/O card and terminal-block pairing, so both physical keying and the system record must be checked.

The official KJ3241X1-BA1 instruction sheet lists 12 VDC Local Bus power at 300 mA and an ambient range of −40 °C to +70 °C. For KJ3241X1-BA1 12P2506X032, confirm that the 12P2506X032 article marking belongs to the same documented hardware revision.

The KJ3241X1-BA1 base model is marked II 3G Ex nA nC IIC Gc, with FM12ATEX0090U and IECEx FMG 12.0035U references. Before using KJ3241X1-BA1 12P2506X032, verify the D4 terminal-block key and all hazardous-area installation conditions for the actual site.

Before installing KJ3241X1-BA1 12P2506X032, de-energize the assembly unless the area is confirmed non-hazardous, verify the complete label and 12P2506X032 marking, check D4 keying, wiring, Local Bus power, carrier compatibility and the installed DeltaV configuration.

No. A related Serial Interface Card must not replace KJ3241X1-BA1 12P2506X032 solely because its appearance or base model is similar. The article marking, hardware revision, terminal-block key, power requirement, certification and DeltaV configuration must all match.

For a KJ3241X1-BA1 12P2506X032 quotation, provide clear photos of the complete nameplate, the 12P2506X032 marking, terminal block and D4 keying, carrier position, connector and wiring arrangement, installed DeltaV system record, quantity and replacement purpose.