ABB PM5630-2ETH AC500 V3 Processor Module

PM5630-2ETH is an ABB AC500 V3 processor module for machine and process-control applications. It provides 8 MB memory and two independent RJ45 Ethernet interfaces; CAN and COM1 depend on the compatible terminal base and must be checked in the complete controller configuration.

Yes. PM5630-2ETH provides two independent RJ45 Ethernet interfaces. Their network settings and application roles are configured separately, so replacement requires verification of IP configuration, project settings and any network services used by the existing machine.

CAN and COM1 for PM5630-2ETH are provided through the compatible terminal base rather than being separate front-panel RJ45 ports. Confirm the installed terminal-base type, field wiring and Automation Builder hardware configuration before moving the processor.

Before replacing PM5630-2ETH, confirm the complete order code, CPU firmware, terminal base, Ethernet configuration, CAN and COM1 wiring, and Automation Builder project. A processor with similar interfaces should not be treated as a direct replacement without this verification.